What To Do If Your Water Heater All Of A Sudden Stops Working
What To Do If Your Water Heater All Of A Sudden Stops Working
Blog Article
This article which follows about How to Troubleshoot and Repair an Electric Water Heater is indeed intriguing. Don't overlook it.
Many modern-day houses utilize an electric hot water heater for their furnace, as a result of its comfort and convenience of use. Nevertheless, similar to any other electric home appliances, problems might develop with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower rather than a hot one or having your bathroom with water that isn't warm enough or perhaps as well hot. Whatever the instance might be, water heater problems can be quite aggravating. Luckily, we've made a list of feasible options to your water heater issues. There are a variety of aspects that might cause much of these problems, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety. Whatever the trouble is, getting it repaired should not present too much of a problem if you follow these actions:
Check Your Power Supply:
As fundamental as this may appear, it is very needed. Without adequate power, your hot water heater will not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any kind of broken or worn-out fuse. Check the device with power after these changes to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power issue, after that attempt checking out your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any of them is malfunctioning, change that component and then inspect whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Make certain the breaker is switched off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This should help heat up the water. Transform the breaker back on and check if the issue has actually been settled.
Call A Professional:
If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't working, you may need to speak to an expert plumber for a professional opinion. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your home. Whatever the case may be, a professional plumber would help resolve the issue.
Final thought
Water heater issues are not always major. A number of them are because of small problems like a blown fuse or damaged burner. Changing the malfunctioning parts ought to work. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our piece on No Hot Water — Water Heater Repair. Thanks for taking time to read our blog. Sharing is caring. Helping people is fun. We appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Start Now
Report this page